Gold-Coated Infrared Lamps: Keeping Your Wafers Clean When the Pressure’s On
In a busy semiconductor fab, the wafer is everything. One fragile lamp can turn a smooth run into a disaster. Standard infrared lamps can crack under the strain, and when they do, they don’t just stop the line—they dust your expensive wafers with quartz. We built our gold-coated infrared lamps to kill that failure mode and keep contamination out of the picture.
Power and Specs: Built for the Long Haul
These lamps are made for serious, nonstop work. It’s not just about wattage—it’s about dense, focused heat. *High-voltage, high-density output: We’re talking 400V and 2500W. That’s the kind of heat punch that makes rapid thermal processing move. But with that power comes heat. Your system’s cooling has to be solid enough to keep the area around the lamp socket from cooking. *Compact size, big capability: At 300mm long and just 10mm wide, the tube slips into tight chambers without messing up the heat profile across the target.
The Safety Behind the Design
Burst resistance isn’t luck—it’s built into the materials. *Gold coating with a real job to do: The gold isn’t for show. It reflects infrared energy back onto the filament, so you get better efficiency and a cooler outer quartz surface. That means less stress on the tube when temperatures swing. *Quartz tube and halogen filament: High-purity quartz plus the halogen cycle keeps the filament steady. No hot spots. No sudden burnouts. *R7s connector: This base is simple, proven, and handles high current cleanly. No hot spots at the connection. When it’s time for maintenance, it’s a straightforward drop-in replacement.
What This Means for Your Wafers
In production, you need heat that’s clean and repeatable. Our gold-coated infrared lamps take the load without risking a rupture. Even if the filament goes, the quartz tube stays intact—so no particles rain down on your wafers. The payoff? Less downtime scrubbing chambers. Fewer ruined wafers. It’s a direct swap for what you already use, but it adds a layer of protection you just can’t get from a standard tube. It’s built to take the grind of 24/7 operation and keep your process clean, day after day.